[CLICK IMAGE FOR LARGER VIEW]
[CLICK IMAGE FOR LARGER VIEW]
The Uni-Vibe® Chorus/Vibrato is one of the most iconic effects in music history. Since the late ’60s, groundbreaking guitar players have used it to expand the tonal and textural palette of the electric guitar. The MXR team has just remastered the classic effect for modern players. The MXR Chorus/Vibrato delivers the same chewy, Leslie-sounding goodness with a smaller footprint. With its simple three-knob interface, you can dial up the iconic effect to your taste in short order. First, use the VIBE switch to select either Chorus Mode—dry signal mixed with pitch-shifted signal—or Vibrato Mode—only pitch-shifted signal. Then, use the LEVEL control to set the effect volume, the SPEED control to set the sweep rate, and the DEPTH control to set overall intensity. The MXR Uni-Vibe Chorus/Vibrato comes in a Phase 90-sized housing—a fraction of the size and weight of the original Uni-Vibe pedal—and features true bypass switching. Perfect for taking this lush, swirly pedal out on the road.
Vintage Echoplex EP-3 tape echo warmth and modulation.
6” Jumper Cable (Black or Red)
EP17J06RR 6” Jumper Cable, Black or Red.
1 SPOT Combo Pack
Multi-pedal power supply.
Boss DC-2W Dimension C Waza Craft
The DC-2W offers not just a perfect sonic recreation of the original DC-2 Dimension C pedal, but also the legendary SDD-320 Dimension D studio rack effect it was based on.
Electro Harmonix Micro Q-Tron Envelope Filter
The Micro Q-Tron is a smooth envelope filter with a funky wah-wah tone. The filter is controlled by its internal envelope follower, analyzing the volume of your notes and the dynamics of your playing to directly sweep the filter's center or cutoff frequency. A stronger attack or louder note will produce a wider frequency sweep while softer playing produces more subtle effects. Use the Q control to make the effect more dramatic.
TC Electronics Ditto X2 Looper
The original Ditto Looper rocked guitarists with a lust for looping like nothing else. Finally something that was simple, made for guitarists and sounded great. What would possibly be better? Well, how about all of that, plus new, next level looping features forged from pure awesome?
Radial Twin-City ABY Switcher
The Twin-City is an active ABY switcher that lets you connect to any two guitar amps and drive them simultaneously without noise, loss of gain or any degradation to your natural guitar tone. The design begins with Radial's award winning class-A buffer for the most natural tone and Drag Control load correction that lets you reintroduce the natural load on the pickup as if connected directly to a tube amplifier. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180° polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum, even when using older vintage amps. As a buffer, the Twin-City lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs.