[CLICK IMAGE FOR LARGER VIEW]
[CLICK IMAGE FOR LARGER VIEW]
The MXR design team has collaborated with Eddie Van Halen to deliver a full range of powerful saturation and hyper-driven tones right at your feet. The resulting EVH 5150™ Overdrive joins hand-adjusted multi-stage MOSFETs with a full complement of controls to deliver overdriven tube-like tones and exceptional sonic flexibility through a wide variety of amps and speaker cabinets. Whether on stage or in the studio, the EVH 5150 Overdrive’s controls dial up the whole spectrum—from Eddie’s groundbreaking early classic tones to the high gain, super-articulate sound he uses today. Output and Gain controls set your volume and distortion levels, while the 3-band passive tone stack EQ section shapes your sound to taste. The Boost switch kicks the 5150 Overdrive into high gear with extra gain and compression, and the Gate control—powered by the Smart Gate® circuit—tames unwanted noise.
Carbon Copy Analog Delay
Analog delay with up to 600 milliseconds of delay time.
6” Straight-Straight Pedalboard Cable (Black or Red)
PC106 6” Straight to Straight Pedalboard Cable, Black or Red.
1 SPOT Power Supply
Multi-pedal power supply.
Earthquaker Devices Avalanche Run Delay
The Avalanche Run is a dreamy sonic discovery device with up to 2 seconds of delay time and a lush reverb. It features complete control over delay time, repeats, mix and voice (with the tone control), as well as control over the reverb length and mix. It can run in one of 3 different modes: Normal, Reverse and Swell. In “Normal” mode, the Avalanche Run functions as a straightforward delay and reverb. In “Reverse” mode, the delay line is in reverse and the reverb remains in normal mode. In “Swell” mode, the Avalanche Run reacts to your picking dynamics and adds a volume swell to the entire signal path much like manually raising and lowering the volume of your guitar. The Avalanche Run features an expression jack that can be assigned to one of six different controls using the “EXP” selector switch. It also features Tap Tempo with six different ratios accessed via the “Ratio” selector switch. The Avalanche Run can also be run in “True Bypass” mode or “Buffered Bypass” mode for trails and features 5 different tail lengths including “Infinite” for lo-fi and continuously degrading pseudo-looping. The Tap switch also has a few other cool secondary functions. While in Normal and Swell mode, you can send the Avalanche Run into self-oscillation by holding down the “Tap” footswitch. In Reverse, mode holding down the Tap switch will flip the delay back into Normal mode and return to Reverse mode once released!
Dr. No Colossus High Gain Booster
The Colossus is a High Gain Booster with the character of a gritty Fuzz, like we know of Ruben Block’s famous guitar tone. Together with this High Gain Booster, the COLOSSUS has an Octavia Fuzz built-in that can operate together but also independently from the Booster. There are many possibilities with the COLOSSUS. For example, the Booster has a fine to be adjusted Volume, Tone, Bass and Gain knobs. The Octavia Fuzz has a Octavia Fuzz Volume on the right-hand side and a two-position Gain switch.
Ernie Ball VP 250K Mono Volume Pedal
Ernie Ball's original full-size mono volume pedal features a super smooth foot sweep for precise volume control and is perfectly voiced for passive audio signals. Directly behind the input jack under the footplate is a micro taper switch which provides the user two distinct volume swell rates. The Ernie Ball VP 250k's rugged construction consists of a billet aluminum housing that is virtually indestructible.
Radial Twin-City ABY Switcher
The Twin-City is an active ABY switcher that lets you connect to any two guitar amps and drive them simultaneously without noise, loss of gain or any degradation to your natural guitar tone. The design begins with Radial's award winning class-A buffer for the most natural tone and Drag Control load correction that lets you reintroduce the natural load on the pickup as if connected directly to a tube amplifier. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180° polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum, even when using older vintage amps. As a buffer, the Twin-City lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs.